BASE
REGULATORY
PRO
PROPLUS
Worldwide
USA and Canada
Worldwide
Worldwide
The Base plan offers GPS location, VIN, Driver ID,
and basic IOX support and harsh breaking detection.
The Regulatory plan adds Hours of Service, IFTA and Temperature Monitoring functionality over the Base plan. It is geared towards assisting fleets in meeting a range of compliance regulations.
The Pro plan offers
the functionality of the Regulatory plan and adds support for engine and accelerometer data and EV data.
The ProPlus plan offers the most functionality, including Active Tracking, a lifetime warranty, and premium services including EV data.
All Base Features +
GPS location
VIN
Driver ID
Basic IOX support
Harsh braking detection
Hours of Service
IFTA
Temperature monitoring
Helps fleets meet compliance regulations
All Regulatory Features +
Engine data
Accelerometer data
EV support
All Pro Features
Active Tracking
Lifetime warranty
Premium services
Advanced IOX support
EV support
Third-Party Device Plan
This device plan is intended for integrations of third-party devices. See here for more information.
PLAN COMPARISONS
DEVICE
BASE
REGULATORY
PRO
PROPLUS
End-to-end security using authentication, encryption, message
integrity verification, individualized devices with unique IDs,
non-static security keys, and digitally-signed firmware.
Patented advanced trip recording for accurate vehicle location
and distance travelled
Wi-Fi Hotspot Functionality (additional monthly rate applies)
ProPlus +
ACTIVE TRACKING - LIVE VEHICLE TRACKING
Real-time audible alerts or verbal coaching for
rules-based driver feedback
Map updated with live vehicle movement
Internal GPS antenna
Position instantly available after cold start (ephemeris)
Simple To Install
Installation record (date/time/location) when unit connected
Device tampering/removal detection with date/time/location stamp
Voltage monitoring on crank (indicates electrical battery health)
Battery voltage monitoring via regular heartbeats when ignition
is off (identifies battery drain — door open/light left on)
Self-calibrating accelerometer — no vehicle setup required
Detect towing events (moving with ignition off)
False positive filtering (i.e. does not record railroad tracks,
speed bumps or potholes as aggressive driving)
Collision data memory buffer records over 100 minutes of
second-by-second data — auto detection and upload of last 1.2
minutes on collision
On-device memory for logging out-of-coverage situations — up
to 1 month of driving
80,000 Logs
80,000 Logs
80,000 Logs
80,000 Logs
Automatic OBD/CAN protocol detection at device install
Automatic VIN readout
Estimated odometer and engine hours (not based on engine
data)
Actual engine hours, engine road speed & odometer
from engine
†For HOS purposes only.
†
ENGINE MANAGEMENT
● SAE J1939 (including FMS) & J1708
● Legacy OBD: SAE J1850 PWM/VPW, ISO 9141-2, and ISO
14230 KWP2000
● Single Wire CAN (GM 33.3 kbps, Fiat/Dodge 50 kbps)
● ISO 15765 CAN (including WWH-OBD, GMLAN, VW TP2.0) @
125 kbps, 250 kbps, 500 kbps
● Medium Speed CAN @ 125 kbps, 250 kbps, 500 kbps
ENGINE DATA
(recorded if supported by vehicle)
Odometer, Engine Hours and Engine Road Speed
†For HOS purposes only.
Coolant temperature
Driver's seat belt
Passenger seat occupied
Total fuel used
Total idle fuel used
Fuel level input (to identify fuel-up events and for data
integration with fuel card)
RPM
Ignition detect
Check engine light
Engine faults, including unknown proprietary engine faults
Data Specific to Electric Vehicles
(supported BEVs and PHEVs)
EV battery charge % (SOC)
EV charging status
EV charging energy
EV driving energy used
IN-VEHICLE AUDIBLE ALERTS / DRIVER FEEDBACK
LIMITED
LIMITED
Speeding
Driver ID not presented on ignition
Idling
Driving in reverse
Rule violation
LIMITED
LIMITED
High RPM — target fuel savings
Seatbelt usage detection over user-defined speed
Aggressive driving (acceleration, braking, cornering)
Over-the-air firmware updates
Over-the-air plan upgrades
Over-the-air parameter modifications
IP indemnification
Limited Lifetime Device Warranty *
*Conditions apply. See Geotab End User Agreement.
EXPANSION
Custom Add-In integrations available
Access partner Add-Ons and solutions through the Marketplace
(additional cost may apply)
Advanced Software Development Kit (SDK) supporting full
integration and customization (C# & Javascript integration, full
AJAX/JSON interface)
IOX-KEYLESS
ProPlus +
Monitor auxiliary input events — door open/close, sensors, etc.
via IOX-AUXM
In-vehicle verbal coaching via IOX Device
Available in English, German, Spanish, French, Italian
Driver ID via IOX-NFCREADERA
Loud buzzer via IOX-BUZZ
USB power for mobile devices and tablets via IOX-USB
One-way HOS data transfer via IOX-USB
Two-way data transfer via IOX-USB*
* Contact your reseller to enable this feature
Iridium satellite connection via IOX-SATIRDv2
EXTRA
EXTRA
EXTRA
EXTRA
Bluetooth ® beacon monitoring via IOX-BT
DICKEY-john® Control Point control system (via the IOX-DJ)
Driver ID not presented on ignition
Rexroth® Compu-Spread® CS440 and CS550 controllers (via
the IOX-COMSPREAD)
Cirus Controls® SpreadSmart Rx® controllers (via the IOX-CRS)
FORCE ® AMERICA 5100ex ® Spreader Control systems (via the
IOX-FAM)
Public Works solution helps government agencies manage
assets such as salt spreaders, snow plows, street sweepers and
waste management vehicles
Read third-party serial data via IOX-RS232M/F
Read third-party data over the CAN bus via IOX-CAN
Read third-party serial data via IOX-RS232M/F
Mobileye integration via IOX-CAN
Reefer monitoring with Valor wireless temperature sensors
(requires IOX-CAN)
Tire Pressure Monitoring Systems (TPMS) integration with Valor
wireless sensors (requires IOX-CAN)
Lone worker and man down solutions with Grace Industries
integrated devices (requires additional IOXs)
Associate HID card to vehicle using RFID via IOX-HID
Monitor analog auxiliary inputs — fuel levels, temperature, PTO
detection, etc. via IOX-ANALOG
Control a remote relay in the vehicle with IOX-OUTPUTM
GARMIN SUPPORT AND IOX-GARMIN
Dispatch vehicle to zone or address
Send multiple routes and auto-select next
2-way messaging
Set driver status